Cabletron Systems RoamAbout User Manual page 43

Step Action
4 To configure the AP, you need the RoamAbout Access Point Manager
(see "Installing the RoamAbout Access Point Manager" on page 3-15)
or a console device.
To use a console device, connect a 9-pin serial cable to the AP's 9-pin,
D-Sub, PC-compatible serial port.
Note: The pinouts for the AP's local console connector are listed in
Appendix A.
1
2
LKG-8804-931-01
Installing the RoamAbout Access Point 3-7
Installing the AP