Table of Contents
Advertisement
Figure 1-1: Front, Side, and Rear View of the AP
1
2
1
3
4
5
6
1
7
2
8
9
10
11
12
13
The AP contains the following LEDs, connectors, ports, and controls:
Item
Name
1
Network
Connector
(BNC)
2
Power OK
LED
3
Module OK
LED
15
16
17
18
LKG-8679-931-02
Description
Connects the AP to a ThinWire network. This
connector is not used if the AP is connected to a
10BaseT network or installed in a MultiSwitch 900 or
DEChub 90.
Lights (green) when the AP has power.
Lights (green) when the AP passes its power-up
self-test. If the AP fails the test, the Module OK LED
is off. If this LED is flashing, the Ethernet or wireless
port (or both) has a fault, preventing connection to the
network.
Introducing RoamAbout Access Point 1-3
Summary of Features
14
Height: 27.31 cm (10.75 in)
Width: 3.18 cm (1.25 in)
Depth: 13.3 cm (5.25 in)
Advertisement
Table of Contents
