Table of Contents
Advertisement
Item
Name
9
PC Card
Present
LED
10
Local Console
Port
11
PC Card Slot
12
Ethernet
Hardware
Address
13
Reset Button
14
Back Cover
15
Locking Tab
16
48-Pin
Backplane
Connector
17
Power Supply
Connector
18
Mounting Tab
Description
Lights (green) when the PC Card is correctly installed
at power-up.
Used to configure the AP.
Used for the PC Card.
Unique physical address of the AP.
Forces a downline load of the AP's firmware from a
load host and resets the AP to its factory default
settings.
Present on standalone APs only. Covers the backplane
connector and mounting assembly.
Locks the AP into a MultiSwitch 900 or DEChub 90.
Provides network and power connections to the AP
when installed in a MultiSwitch 900 or DEChub 90.
Receives +5 Vdc from the AP's standalone power
supply. Not used when the AP is installed in a
MultiSwitch 900 or DEChub 90.
Secures the AP to the MultiSwitch 900 or DEChub 90
backplane.
Introducing RoamAbout Access Point 1-5
Summary of Features
Advertisement
Table of Contents
