Installing The Pc Card - Cabletron Systems RoamAbout User Manual

Installing the PC Card

Installing the PC Card
To install the PC Card, do the following:
Step
1
2
3-2 Installing the RoamAbout Access Point
Action
With the logo on the PC Card facing the same direction as the AP's BNC
connector, partially insert the card into the PC Card slot.
PC Card
Logo
Gently push the card into the slot until it is firmly seated. You will sense
a slight resistance as you insert the card. When properly inserted, the
card protrudes approximately 1-1/2 inches from the AP.
BNC
Connector
1
2
2844_01_04