Ap To Ap Configuration - Cabletron Systems RoamAbout User Manual

AP to AP Configuration

You can connect two separate LANs over a wireless link by configuring two
RoamAbout Access Points to communicate with each other. This is called a
LAN-to-LAN connection.
Figure 1-3 shows two APs in different buildings using an outdoor antenna to connect
the LANs in those buildings.
Figure 1-3: Building-to-Building Configuration
1
2
You can also configure APs to connect two LANs in the same building.
Contact your Cabletron sales representative or visit the RoamAbout web site for more
information about the optional outdoor antenna kits.
AP to AP Configuration
2844-01-03
Introducing RoamAbout Access Point 1-7
1
2