Table of Contents
Advertisement
■ Reset button
At the left of front panel, the reset button is designed for reboot the VDSL2 Switch without turn off and on the power.
The following is the summary table of Reset button
Reset Button Pressed and Released
About 1 second
Until the SYS LED lit off
To press the RESET button about 10 seconds and then release. The VDSL2 Switch will back to
the factory default mode. Be sure that you backup the current configuration of VDSL2 Switch;
else the entire configuration will be erased when pressing the "RESET" button.
2.1.2 LED Indicators
The front panel LEDs indicates instant status of port links, data activity, system operation and system power, helps
monitor and troubleshoot when needed.
Figure 2-2 Reset button of VC-810S / VC-810S48
functions:
Function
Reboot the VDSL2 Switch.
Reset the VDSL2 Switch to Factory Default configuration.
The VDSL2 Switch will then reboot and load the default IP.
settings as below:
。
。
。
。
Figure 2-3 PLANET VC-810S / VC-810S48 LED panel
User's Manual of VC-810S / VC-810S48
Default Password: admin
Default IP address: 192.168.0.100
Subnet mask: 255.255.255.0
Default Gateway: 192.168.0.254
11
Advertisement
Table of Contents
