Table of Contents
Advertisement
It is recommended that you research any time server selection to ensure that it can meet your
specific time server requirements. Any NTP time server selection should be evaluated to
determine if the server in question meets your specific time server requirements.
For more detail about the Time Server and Time Server List, please refer to the following URL:
http://ntp.isc.org/bin/view/Servers/WebHome
http://ntp.isc.org/bin/view/Servers/NTPPoolServers
http://support.microsoft.com/kb/262680/en-us
4.2.4 Password Setting
This section provides password change Configuration of VDSL2 Switch. After setup completed, please press "Save"
button to take effect. Please login Web interface with new password, the screen in
The Password Setting page includes the following fields:
Object
Old Password
New Password
Confirm
After change the default password, if you forget the password. Please press the "Reset" button
in the front panel of VDSL2 Switch over 10 seconds and then release, the current setting
includes VLAN, will be lost and the VDSL2 Switch will restore to the default mode.
Figure 4-5 Password Setting screen
Description
Enter the current password to confirm acess permission for password change.
Enter the optional new or changed password for the account. It will not display as
it is typed, only asterisks (*) will show. Passwords are alpha numeric characters
in length, and are case sensitive.
(Maximum Length: 16 characters)
Enter the password again, to confirm that you entered it correctly. This field will
not display, but will show asterisks (*)
28
User's Manual of VC-810S / VC-810S48
Figure 4-5
appears.
Advertisement
Table of Contents
