2.
Assign the VLAN Trunk Port to be the member of each VLAN – which wants to be aggregated. At this sample, add
Port-9 to be VLAN 2 and VLAN 3 member port.
3.
Repeat Step 1 and Step 2, setup the VLAN Trunk port at the partner switch.
4.
To add more VLANs to join the VLAN trunk, repeat Step 2 to assign the Trunk port to the VLANs.
Figure 4-31 Add VLAN Trunk port to each VLAN
54
User's Manual of VC-810S / VC-810S48