IEEE 802.1Q VLAN
By setting the VLAN Type with 802.1Q, IEEE 802.1Q tag-based VLAN is enabled. VLAN classification is the first step
before VLAN table lookup. The VDSL2 Switch will check the VID value of the received packets and the VLAN table
ingress/egress rule, then forwards the packets to valid destination ports.
The page includes the following fields:
Object
VLAN Type
Port
Tag/Untag
Figure 4-17 VLAN Type – 802.1Q VLAN screen
Description
There're two VLAN mode support – 802.1Q VLAN and Port-Bas VLAN.
• 802.1Q – Packets income will be tagged with VID as the PVID setting. All ports
on the switch belong to default VLAN (VID 1).
• Port-Base - Packets can only be broadcast among other members of the
same VLAN group. Note all unselected ports are treated as belonging to the
default system VLAN.
• No VLAN - Forbidden ports are not included in the VLAN.
If Port-Based VLAN are enabled, then VLAN-tagging feature is ignored.
Select the physical interface for which you want to display or configure data.
Allow 802.1Q Untagged or Tagged VLAN for selected port.
43
User's Manual of VC-810S / VC-810S48