Vlan Membership - Planet VC-810S User Manual

forwarded by an untagging port will have no 802.1Q VLAN information. (Remember that the PVID is only used
internally within the Switch). Untagging is used to send packets from an 802.1Q-compliant network device to a
non-compliant network device.
Frame Income
Frame Leave
Leave port is tagged
Leave port is untagged

4.4.2 VLAN Membership

This function group individual ports into a small "Virtual" network of their own to be independent of the other ports. The
screen in Figure 4-18 appears.
The page includes the following items:
Object
• VLAN
• VID
• Member Port
Income Frame is tagged
Frame remains tagged
Tag is removed
Figure 4-18 VLAN Membership screen
Description
The VLAN entry index. Use the pull-down menu to specify the VLAN group for
VLAN member ports configure. The Switch supports up to 32 active VLAN groups.
Specify the VLAN Identifier for the 802.1Q VLAN, the available range of the VID is
(1 to 4094). ( 802.1Q mode only)
Select the physical interface for which you want to add or remove from the specify
VLAN group. Checked the Member box to select the members for the VLAN group.
Number 1-9 is the Physical interface ID of the VDSL2 Switch.
ADD: To add selected ports to the specify VLAN group.
Remove: Remove the selected ports from the specify VLAN Group.
After setup completed, please press "Save" to take affect.
User's Manual of VC-810S / VC-810S48
Income Frame is untagged
Tag is inserted
(Tag=PVID or Original VID be remained)
Frame remain untagged
(Tag=PVID be removed)
45