Table of Contents
Advertisement
While SNMP mode is selected, the displayed page includes the following configurable data
Object
• Mode
• System Name
• System Description
• System Contact
• System Location
• Trap Destination IP
The VDSL2 Switch supports SNMP System information read and SNMP Trap only. It is not
able to be management via SNMP SET command.
Description
To turn on or turn off the SNMP Trap function on the VDSL2 Switch.
The system name of the VDSL2 Switch which would show in the SNMP software.
The system description of the VDSL 2 Switch which would show in the SNMP
software.
The contact person of the VDSL2 Switch which would show in the SNMP software.
The system location of the VDSL2 Switch which would show in the SNMP software.
Enter the IP address to receive SNMP traps from this device. Enter 4 numbers
between 0 and 255 separated by periods.
33
User's Manual of VC-810S / VC-810S48
Advertisement
Table of Contents
