Peak Pilates Cadillac Assembly & User's Manual page 7

Reformer Mode Assembly (continued)
A
B
C
3. Installing the Carriage Springs:
A. Engage the end of each of the springs which is not color coded to its respective
eyebolt located on the spring anchor under the carriage. If you have purchased a
standard spring set the springs are best arranged in the following order:
Blue (Light), Yellow (Medium), Blue, Red (Heavy) and than Yellow
B. Verify that the springs rest on top of the spring support bar as shown.
C. Place the closed ends of the springs over their respective hooks on the round
spring bar.
4. Installing the Leather Straps (if applicable):
A. Using the clips attached, snap the leather swivel handles onto the steel rings
at the end of the straps.
B. With the spring bar in first gear and the gear block in the first hole in the track,
place the handles over the shoulder blocks.
C. Thread the loose ends of the straps down through the pulleys mounted on the
cross member at the head end of the Cadillac Convertible frame (end opposite the
foot bar) looping the ends back toward the carriage. Verify that the strap is not
twisted.
D. Unscrew the black knobs on the underside of the carriage (one on each side of
the head rest).
E. Note the holes located near the end of the leather strap. We suggest that you
select a hole that eliminates the slack in the leather strap. If you prefer a different
setting simply select the commensurate hole.
F. Slide the selected holes over the protruding studs (see photo).
G. Re-assemble the black knobs.