Peak Pilates Cadillac Assembly & User's Manual page 12

Storing the Push-Through Bar
Installing the Springs
Installing the Fleece Hanging Straps
1. Rotate the push-through bar Bar back through the upright.
Wrap the short black strap attached to the middle eyebolt on
the cross pole around the handle of the push-through bar.
2. Re-attach the clip.
Leg Springs
The leg springs are the longest springs. Using double
ended clips at each end, attach these springs to the
eyebolts in the roll down upright poles (opposite the push
through bar). If you have the optional leg-spring slider
bar, attach the leg springs to its eyebolts using double
ended clips. The leg springs can be adjusted between the
eyebolts depending on the height and desired tension.
Arm Springs
Arm springs are the smallest in diameter. Use double
ended clips to attach these to the roll-down bar (the round
wooden bar with eyebolts at each end) and to the eyebolts
in the roll-down cross pole. To perform the standing arm
exercise series, attach the arm springs to the eyebolts on
the back of the upright poles.
Attach one of the fleece hanging straps to each of the
upper spanner poles "luggage tag style".
1. Hold a strap so that it is centered over and
perpendicular to the length of a spanner pole. The black
webbing material will be on one side of the pole and the
fleece cover on the other.
2. Allow both ends to drop such that black webbing forms
a loop below the spanner pole.
3. Insert the fleece cover through the loop formed by the
black web and pull down on the strap to tighten the knot.