Least Cost Routing - Doro 8085 User Manual

Least Cost Routing (LCR)
This function will automatically select the telephone network operator of choice.
The telephone can be set up to add digits to and/or replace certain digits in
telephone numbers.
To choose a certain network operator, you would normally dial a prefix code
before the actual phone number.
Example:
You have chosen a certain operator for international calls. In order to place your
calls with this operator you must dial, for example 9502 before the international
dialling code. You can set up the LCR function so that whenever you dial a
number beginning with 00, the phone will automatically change this to 950200.
For example: the number 0046 46 2805000 would automatically be dialled
9502 0046 46 2805000
Please note!
In order to place your call with a certain operator you must be a registered subscriber.
A maximum of two LCR set-ups can be active.
Setting Up an LCR number
1. Press until
w
2. Scroll to
SEttInGS
3. Scroll to
bASE
4. Scroll to
LCr SEt
5. Enter the base unit PIN code (0000 at default).
6. Select one of the two settings.
7. Enter sequence to be replaced (up to five digits, e. g. 00). Use
or change. Press
8. Enter sequence to be added (up to ten digits, e. g. 950200). Press
9. Select preferred setting (
10. Store more numbers or return to menu system using
Automatic network prefix using LCR
Leaving the field for sequence to be replaced empty (point 7 above) causes the
telephone to dial all numbers with the added sequence (point 8 above).
www.doro.com
System Settings
PHOnE LISt SEt
. Press .
0
. Press .
0
. Press .
0
.
0
/
OFF On
is shown.
). Press .
0
English
to erase
C
.
0
.
L
21