Table of Contents
Advertisement
English
Making a Call
1. Enter the required telephone number. Mistakes can be erased using x.
2. Press
, the telephone number will now be dialled.
o
3. Press
again to terminate the call.
o
Receiving a Call
1. Wait for the handset to ring.
2. Press
to answer the call.
o
3. Press
again to terminate the call.
o
Please note!
The telephone's ringing signal does not follow the line signal, ie it may continue to ring for up to 7
seconds after answering a call. If the telephone cannot connect to a line, a warning tone will be heard.
The problem may be due to the batteries running low, the handset being too far from the base unit or
all of the transmission channels being engaged.
Redial Button
The five most recently dialled numbers can easily be redialled using
1. Press
and scroll to the required telephone number using
r
2. Press
to dial the telephone number.
o
Volume Control
5035:
The earpiece volume may be adjusted during a call by pressing
5045:
The volume is adjusted by accessing the menu, please refer to page 17.
The display will show the selected volume: +=low, ++=medium, +++=high, and
++++=maximum.
Optional Network Services
Access to additional network services can be gained by using the recall button
and
keys. Contact your network operator for more information.
#
Press the recall button
connected to a PBX (TBR only).
8
Operation
followed by the extension number to transfer calls when
R
:
r
/
.
< <
> >
.
,
R
www.doro.com
*
Advertisement
Table of Contents
