De-Register All Other Handsets; Type Of Caller Id (Cid); Tone / Pulse Dialling - Doro 5045 User Manual

De-register All other Handsets

All other handsets except the one on which you perform the operation below, can easily
be de-registered from a base.
1. Press .
w
2. Press the keypad digits
3. Enter the PIN code (1111 for this model).
4. Press .
0

Type of Caller ID (CID)

Dependant on your network sytem requirements the Caller ID settings may need to
be adjusted.
If the phone has been purchased in Australia this setting will be displayed as 1/4.
1. Press .
w
2. Scroll using
< <
3. Press repeatedly until the display shows 1/5 - UK (1/4 - Australia).
0
4. Scroll using
< <
1=BT for UK/Normal for Australia
2=CCA for UK/Polarity reversal for Australia.
5. Press to confirm setting and move to the next programming sequence,
0
alternatively.
6. Press to exit the Menu system.
w
Tone/Pulse Dialling (UK only)
Select dialling type (tone or pulse). The default setting is tone dialling, dependant on
your network system requirements this may not require changing.
This setting only applies to models purchased in the UK.
1. Press .
w
2. Scroll using
< <
3. Press repeatedly until the display shows 2/5.
0
4. Scroll using
< <
setting and move to the next programming sequence, alternatively.
5. Press to exit the Menu system.
w
www.doro.com
Settings
.
9 5
/ until flashes in the display. Press
> > w
/ to the desired setting:
> >
/ until flashes in the display. Press
> > w
/ to the desired setting (TONE/PULSE). Press
> >
.
0
.
0
to confirm
0
English
15