Reset To Default; Expanded System (Two Or More Handsets) - Doro Magna 2000 Manual

Note! A de-registered handset can no longer be used with the
system. It needs to be registered as a new handset, see
Register a new handset, p.12
Change PIN
Note! This PIN is not the same as used for remote access of
answering machine, see
Press w/0. Scroll }/{ to BS SETTINGS and press w/
1.
0.
Scroll to CHANGE PIN and press w/0. Enter the old PIN
2.
code and press w/0.
Enter the new PIN code and press w/0. Confirm with
3.
the new PIN code and pressw/0 again.

Reset to default

You can reset your phone to the default settings. After reset,
all your personal settings, call lists and redial lists will be de-
leted, but your phonebook remains unchanged.
Press w/0. Scroll }/{ to DEFAULT and press w/0.
1.
Enter the PIN code (default code is 0000). Press w/0.
2.
Press w/0 again to confirm.
3.

Expanded system (two or more handsets)

The handset call number for internal calls will be displayed to
the right on the display in standby mode. The base unit should
be positioned centrally so that the coverage area is roughly
equal for all handsets.
Register a new handset
All handsets included in the package are already registered to
the base unit. You can register up to 5 handsets to one base
unit.
English
12