Ducati SPORTTOURING ST4S ABS Owner's Manual page 84

Number plate light
To expose the number plate bulb, withdraw the bulb
holder from the number plate holder, then extract the
bulb and replace it.
1
E
fig. 87
Stop light
To replace the stop and parking light bulb, unscrew the
two screws (1, fig. 87) that secure the glass and remove
glass. The bulb is of the banjo-type: press and rotate anti-
clockwise to remove; fit the spare bulb by pressing and
turning clockwise until it clicks (fig. 88). Refit the glass
and tighten the screws (1).
fig. 88
84