Westinghouse WLE527WA User Manual page 8

540mm upright cooking appliances
Hide thumbs Also See for WLE527WA:
Table of Contents

Advertisement

USING THE GAS COOKER
GAS HOTPLATE
Ensure burner caps, crowns and trivets are properly assembled.
For wok ONLY use the trivet and burner dedicated for
wok cooking.
Flame Port
Burner Cap
Burner Cup
Burner Cap
Burner Crown
Spark Plug
GAS OVEN BURNER FLAME
From a cold start the oven burner flame will be higher
on the left hand-side. After reaching the set temperature, the
flame will become even. This does not affect cooking results.
8
GAS COOKER
Spark Plug Hole
Burner Crown
Spark Plug
LIGHTING GAS HOTPLATE, GRILL AND OVEN
HOTPLATE IGNITION – (ELECTRONIC)
Turn appropriate Burner Control Knob onto maximum and
at the same time press the Electronic Ignition Switch.
HOTPLATE IGNITION – (MANUAL)
Turn control knob to the maximum. At the same time, hold hand-
ignitor next to the burner and ignite (Hand-ignitors not supplied).
GRILL IGNITION – ELECTRONIC
Turn Grill Control Knob onto maximum and at the same time
press Electronic Ignition Switch.
GRILL IGNITION – PIEZO
Turn the Grill Control Knob on to Maximum and at the same
time press the grill igniter button (several times if necessary)
It will make a loud 'clack' noise as the piezo mechanism
creates a spark.
GRILL – IN OVEN
Grill is electric and is operated by control knob only.
OVEN IGNITION – ELECTRONIC
Push and hold Oven Control Knob onto desired temperature and
at the same time press the Electronic Ignition Switch.
Hold control knob in for 15 seconds after ignition.
OVEN IGNITION – PIEZO
With the left hand push and hold the Oven Control Knob in and
turn it a quarter of the way anti-clockwise. Keep the oven Control
Knob pushed in firmly and at the same time push the Oven Piezo
Igniter button on the right hand side of the control panel (several
times if necessary). It will make a loud 'clack' noise as the Piezo
mechanism creates a spark.
Hold control knob in for 15 seconds after ignition.
WARNING
CAUTION
If hotplates, grill or oven do not light within 15 seconds,
allow 1 minute for gas to clear before trying again.

Advertisement

Table of Contents
loading

Table of Contents