Service Fuse - Westinghouse WLE527WA User Manual

installation
INSTALLATION
REPLACING THE OVEN DOOR
(to be done by qualified personnel only)
1. Hold door with both hands.
Procedure to assemble the door
2. Locate both hinges into the frame slots at the
same time.
(to be done by personnel only)
Frame slot
Hinge
Notch
1. Hold door with both
1. Hold door with both hands.
3. Ensure that the location notch drops into frame
hands and locate both
slot. Care should be taken not to damage other
hinges into the frame slots
parts of the cooker.
2. Locate both hinges into the frame slots at the
at the same time.
same time.
Frame slot
Hinge
Frame slot
Notch
Hinge
Notch
3. Ensure that the location notch drops into frame
slot. Care should be taken not to damage other
parts of the cooker.
Procedure to assemble the door (to be done by qualified personnel only).
Frame slot
Hinge
Notch
4. Open door fully and rotate stirrups away from
Notch
you back to their original position.
2. Ensure that the location notch drops into the
5. Close the door fully.
Care should be taken not to damage other
4. Close the door fully.
4. Open door fully and rotate stirrups away from
you back to their original position.
5. Close the door fully.
SERVICE FUSE LOCATION – MODELS WITH POWER POINT ONLY
This product is fitted with a power outlet at each end of the
control panel.
The outlets are protected by a replaceable 15 amp fuse located
frame slot.
at the rear of the product.
parts of the cooker.
WARNING
WARNING
Before servicing the fuse, ensure that all power to the product
is switched off.
To access fuse, unscrew fuse housing and remove from
appliance. (see diagram).
Chef 540 Upright Cooker INSTALLATION 19
3. Open door fully and rotate
the stirrups away from you,
back to their original position.
Fuse
Fuse housing
23
7
INSTALLATIOM