Table of Contents
Advertisement
Internet Camera User Guide
Click "Upgrade Firmware" button, a dialog box appears. Use "Browse" button to locate
the upgrade file in your computer, then click "Start Upgrade" to start the upgrading.
·
The upgrade may take several minutes.
M
·
When the upgrade is completed, the ICA-102/102W Camera will
Note
restart. This will cause any existing connections to be terminated.
Any users viewing or recording the video will see this as an error.
M
Do not interrupt the upgrading procedure during proceeding; or the
inner component might be permanently damaged.
Note
Network:
MAC Address:
The current IP address of the Wireless/Ethernet Internet Camera.
IP Address:
The IP Address of the ICA-102/102W Camera.
Network Mask:
The network mask associated with the IP address above.
Gateway:
The IP Address of the remote Gateway associated with the IP Address above.
Wireless (ICA-102W Only):
Network Type:
It shows the Network Type currently is use (Ad-hoc or Infrastructure).
SSID:
This displays the wireless SSID.
Channel:
This shows the wireless channel currently used.
Encryption:
This shows if the WEP Encryption is Enabled or Disabled.
Video:
Resolution:
The image size of the video stream.
Current Viewers:
This shows how many viewers are currently viewing the Video stream.
Log:
ICA-102 series will record the system events here. You can use these logs for diagno-
sis.
Refresh:
Click "Refresh" button to renew the system log.
30
Advertisement
Table of Contents
