Planet ICA-102 User Manual page 8

LAN port
Reset Button
Use a standard LAN cable to connect your ICA-102/102W
Camera to a 10/100BaseT hub or switch.
Note:
On the ICA-102/102W Camera, attaching the LAN cable will
disable the Wireless interface. Only 1 interface can be active
at any time.
This button has two (2) functions:
·
Restore Default IP Address. When pressed and re-
leased, the ICA-102/102W Camera will reset its IP
address to the default value of 192.168.0.20.
·
Restore Default IP Address, Administrator ID, and
Administrator password. When pressed and held or 3
seconds, the IP address, Administrator ID, and Adminis-
trator Password settings will be set to their default values.
·
IP address: 192.168.0.20
·
Administrator ID: admin
·
Administrator Password: admin
Note:
After this procedure is completed, the Ready LED will blink
three times to confirm that the reset was completed success-
fully.
5