Chapter 5 Client Utility; Install Procedure - Planet ICA-102 User Manual

Internet Camera User Guide
Chapter 5
Client Utility

Install Procedure

STEP 1
Insert the CD-ROM into the CD-ROM drive to initiate the autorun program. Once
completed a menu screen will appear as follows:
STEP 2
To install the Viewer & Recorder Application click on the "Viewer & Recorder" hyper-
link to activate the installation procedure for the application program.
If the above screen is not shown, you can start the installation as follows.
1. Click on Start Menu/ Run.
2. Enter "D:\Utility\setup.exe" in the appeared box, where "D" is the letter of your CD-
ROM drive.
3. Click on "OK" button.
STEP 3
The Welcome screen will appear. Click on the "Next" button to proceed with the
installation.
5
32