Osd - Camera Setup > Wb Setup - Digital Watchdog x39 User Manual

OSD -
CAMERA SETUP > WB SETUP
1
ZOOM CAMERA SETUP
- - - - - - - - - - - - - - - - - - - - - - - - - - -
FOCUS MODE SEMIAUTO
DIGITAL ZOOM ON
IMAGE FLIP OFF
OFF
FLICKERLESS
DIS MODE OFF
<WHITE BALANCE SETUP>
<AUTO EXPOSURE SETUP>
<SPECIAL>
BACK
EXIT
Press
Near/Enter
Key
2
WB SETUP
- - - - - - - - - - - - - - - - - - - - - - - - - - -
DAY/NIGHT DAY
- WB MODE ATW2
- RED ADJUST 0
- BLUE ADJUST 0
BACK
EXIT
Joystick Down,
Press Near Key
3
WB SETUP
- - - - - - - - - - - - - - - - - - - - - - - - - - -
DAY/NIGHT DAY
- WB MODE ATW2
- RED ADJUST 0
- BLUE ADJUST 0
BACK
EXIT
Joystick Down
4
WB SETUP
- - - - - - - - - - - - - - - - - - - - - - - - - - -
DAY/NIGHT DAY
- WB MODE AWC >
- RED ADJUST 0
- BLUE ADJUST 0
- R-GAIN 0
- B-GAIN 0
BACK
EXIT
Joystick Right
5
WB SETUP
- - - - - - - - - - - - - - - - - - - - - - - - - - -
DAY/NIGHT DAY
- WB MODE AWC >
- RED ADJUST 0
- BLUE ADJUST 0
- R-GAIN 74
- B-GAIN 5 2
BACK
EXIT
ZOOM CAMERA SETUP
1
Basically the camera setup is same as x27, x33, x36, x37 except
for "DIS MODE," "<SPECIAL>."
DIS MODE ON / OFF
Sets the digital image stablization mode.
<SPECIAL>
Goes to "SPECIAL SETUP" screen.
2 WB SETUP - DAY
DAY/NIGHT
DAY / NIGHT
The day/night mode can be set independently.
Night mode will only be deactivated if "AGC" in "CAMERA SETUP"
is set to "OFF" or "FIX."
WB MODE ATW1 / ATW2 / AWC / 3200K / 5600K / OFF
- ATW1: The color temperature is adjusted automatically between
2500K and 9300K.
- ATW2: The color temperature is adjusted automatically between
2000K and 10000K.
- AWC: The color temperature is adjusted automatically once, then
adjusted value of "R-GAIN, B-GAIN" are maintained. Gain value can
be adjusted manually by the user. It can be fixed as 3200K or 5600K.
- OFF: Only activated when "NIGHT" is selected. At night, the setting
will be same as day's setting.
RED/BLUE ADJUST -32 ~ +32
In every mode except "OFF," users can adjust the red/blue adjust
value to have the image they want.
R/B - GAIN 0 ~ 1023
If AWC is on, the adjusted value will be marked. Also, the user can
adjust the values after it was adjusted automatically.
6 WB SETUP - NIGHT
WB SETUP
- - - - - - - - - - - - - - - - - - - - - - - - - - -
DAY/NIGHT
- WB MODE
- BRIGHTNESS
- RED ADJUST
- BLUE ADJUST
- R-GAIN
- B-GAIN
BACK
EXIT
BRIGHTNESS LOW / MIDDLE / HIGH
When "NIGHT" is selected, it sets the criterion of the automatic
day/night selection.
If set to "LOW," the image has to be very dark to be recognized as
night among 3 settings. If set to "HIGH," the image will be recognized
as night even though it is a little dark.
45
NIGHT
AWC >
MIDDLE
0
0
74
5 2