Pro-Form 790 Hr Elliptical User Manual page 10

11. Route the Left Extension Wire (135) through the Left
Rear Handlebar Cover (19), and then connect the Left
Extension Wire to the Left Controller Wire (127). Then,
route the Right Extension Wire (136) through the Right
Rear Handlebar Cover (21), and connect it to the
Right Controller Wire (128).
12. Note: For clarity, the wires that you connected in
step 11 are not shown in the drawing at the right.
Hold the Left Front Handlebar Cover (18) and the Left
Rear Handlebar Cover (19) around the Left Upper
Body Arm (11). Attach the Handlebar Covers with three
M4 x 32mm Round Head Screws (105). Avoid pinch-
ing the wires (not shown).
Attach the Right Front Handlebar Cover (20) and
the Right Rear Handlebar Cover (21) around the
Right Upper Body Arm (12) in the same way.
13. Identify the Left Pedal (13) and the Left Pedal Leg
(14), which are marked with "Left" stickers.
Attach the Left Pedal (13) to the Left Pedal Leg (14)
with an M4 x 45mm Screw (108), three M4 x 14mm
Screws (104), and four Star Washers (112).
Attach the Right Pedal (not shown) to the Right
Pedal Leg (not shown) in the same way.
11
19
12
105
18
13
112
108
104
10
128
127
136
135
20
12
11
19
13
112
14
112
112
104
21
21