Starting A Dishwashing Cycle - Electrolux FAVORIT 88080 i User Manual

Starting a dishwashing cycle

1. Check that the spray arms can turn freely.
2. Turn the water tap on fully.
3. Close the door.
4. Press the ON/OFF button.
5. Using the direction buttons (
The name of the selected dishwashing cycle will flash. To the right of the name
the estimated length of the programme is displayed.
6. Press the OK/START button.
The selected dishwashing cycle will start. In the text line in the display you can
see the name of the current stage in the programme. Next to this you can see
the estimated time remaining in minutes.
Using the OPTION button you can briefly display the name of the dishwashing
cycle in the display.
A dishwashing cycle can only be started from the Programmes menu.
During the dishwashing cycle, the remaining time shown in the display may be
adjusted according to the size of the load, degree of soiling, etc.
If the dishwashing cycle does not start:
If after pressing the OK/START button the cycle does not start and a message ap
pears in the display, (REFILL RINSE AID, REFILL SALT or PLEASE CLOSE DOOR):
• Follow the instructions in the message.
After the problem has been remedied, the cycle starts automatically.
With the messages REFILL RINSE AID or REFILL SALT you can nevertheless start
the cycle by pressing the OK/START button again.
While a dishwashing cycle is running, you cannot make changes to options or
settings.
or ) select the desired cycle.
29
In daily use