Table of Contents
Advertisement
The Options menu
• Here go to the desired setting using the direction buttons (
info status bar your position within the menu is always shown.
• For the option DELAY START see the section "Setting a delay start" for the op
tion 3 IN 1 see the section "Before using for the first time"
• Use the OK/START button to switch from the menu item SETTINGS... to the
Settings sub menu.
The Settings sub menu
Here go to the desired setting using the direction buttons (
status bar your position within the sub menu is always shown.
• LANGUAGE
To set the language of the text line in the display; also see the section "Reset
ting the language".
• WATER HARDNESS
To set the value for water hardness electronically (value range 1 to 10).
• RINSE AID
When option 3 IN 1 is activated: Switch rinse aid addition function on or off.
When option 3 IN 1 is not activated: The rinse aid addition function is always
switched on, even if OFF is selected for RINSE AID.
• SOUND VOLUME
To set the sound volume of the acoustic signals (value range 0 to 5); at 0 the
acoustic signals are switched off.
• BRIGHTNESS
To set the brightness of the display (value range 1 to 10).
• CONTRAST
To set the contrast of the display (value range 1 to 10).
Adjusting an option/setting
1. Go to the option or setting that you wish to adjust.
2. Press the OK/START button. The value that is currently set will flash.
3. Using the direction buttons (
4. Press the OK/START button. The newly set value is lit without flashing.
5. Using the direction buttons (
A selected value is accepted using the OPTION button. In the display the first en
try in either the Options or Settings menu is displayed.
You can abort the setting procedure using the RESET button.
1. not available with all models
1
or
) select the desired value.
or
) you can select another option or setting.
Basic operation
or
). In the
or
). In the info
11
Advertisement
Table of Contents
