What To Do If; Resetting The Language; Remedying Small Malfunctions - Electrolux FAVORIT 88080 i User Manual

Electrolux dishwasher
Table of Contents

Advertisement

What to do if ...

Resetting the language

You can reset the language of the display to the factory setting at any time. As
well as the language, the CONTRAST
1. Press the RESET button repeatedly until the display in the display no longer
changes.
2. Press and hold the RESET button for six seconds.
In the text line LANGUAGE ENGLISH appears. The word ENGLISH flashes.
3. Using the direction buttons
4. Press the OK/START button.
5. If required, adjust the values for CONTRAST
"Basic operation".

Remedying small malfunctions

If one of the following fault messages is displayed in the display during opera
tion:
– OPEN THE TAP
– DRAIN BLOCKED
Remedy the fault, then re start the dishwashing cycle. The cycle will continue.
In the case of other fault messages:
– Cancel the dishwashing cycle.
– Switch the appliance off and on again.
– Select dishwashing cycle.
– Press the OK/START button.
If the fault is displayed again, please contact the Customer Care Department
and inform them of the fault message.
1. not available with all models
1
and BRIGHTNESS settings are also reset.
or
select the desired language.
1
to BRIGHTNESS; see the section
What to do if ...
35

Advertisement

Table of Contents
loading

Table of Contents