Table of Contents
Advertisement
Starting a dishwashing
cycle
1. Check that the spray arms can turn freely.
2. Turn the water tap on fully.
3. Close the door.
4. Press the ON/OFF button.
5. Select the desired cycle. In addition, press the cy-
cle selection button repeatedly until the desired cy-
cle is displayed in the multi-display (see cycle
table).
The selected cycle will begin after approximately 5
seconds.
The current stage of the cycle is always shown in the
cycle progress display. The multi-display shows the
remaining time expected for the cycle.
3
During the dishwashing cycle, the remaining
time shown in the multi-display may be adjust-
ed according to the size of the load, degree of
soiling, etc.
Interrupting or aborting a dish-
washing cycle
Only interrupt a dishwashing cycle that is in progress
if it is absolutely necessary.
Interrupting the dishwashing pro-
gramme by opening the dishwasher door
1
Hot steam may escape when the door is
opened. There is a risk of scalding.
1. Open the door carefully. The dishwashing cycle will
stop.
2. Close the door. The cycle will continue.
Aborting the dishwashing cycle
1. Press function buttons 2 and 3 and keep them
pressed.
Two lines are displayed in the multi-display.
2. Release the function buttons. The dishwashing cy-
cle has been cancelled.
3. If you want to start a new cycle, check whether
there is any detergent in the dispenser.
3
Turning off the dishwasher will only interrupt a
selected dishwashing cycle, not cancel it. The
cycle will recommence after turning the dish-
washer back on again.
Additional functions
Halbe Ladung (Half Load)
Can be selected with the cycles: INTENSIVO, NOR-
MAL
Select this additional function when there are only
half the number of dishes.
1.Within 5 seconds of selecting the cycle, press the
Halbe Ladung (Half Load) button..
Indicator Halbe La-
dung (Half Load) is lit:
Indicator Halbe La-
dung (Half Load) is not
lit:
When the cycle has finished, the Halbe Ladung (Half
Load) function is automatically switched off again
Sanitize
Can be selected with the cycles: AUTO, INTENSIVE,
NORMAL, QUICK
This additional function makes it possible to hygieni-
cally clean items such as plastic chopping boards or
jam jars.
1.Within 5 seconds of selecting the cycle, press the
Sanitize button.
Indicator Sanitize is lit:
Indicator Sanitize is
not lit:
When the cycle has finished, the Sanitize function is
automatically switched off again.
Spülen + (Extra Rinse)
Can be selected with the cycles: AUTO, GLASS, IN-
TENSIVE, NORMAL, ECO, QUICK
If this additional function is selected, a second inter-
mediate rinse is performed.
1.Within 5 seconds of selecting the cycle, press the
Spülen + (Extra Rinse) button.
Indicator Spülen +
(Extra Rinse) is lit:
Indicator Spülen +
(Extra Rinse) is not lit:
When the cycle has finished, the Spülen + (Extra
Rinse) function is automatically switched off again.
Additional function
switched on
Additional function
switched off
Additional function
switched on
Additional function
switched off
Additional function
switched on
Additional function
switched off
23
Advertisement
Table of Contents
