Fuser Width Switch Information - Xerox Color J75 Press User Manual

Problem solving

Fuser width switch information

With the launch of this product comes a new line of fuser assemblies. The new fuser
assemblies are equipped with a width switch. Before installing a new fuser, the customer
can select a different switch position, if they have multiple fuser assemblies on site.
Setting the width switch to a desired setting reduces/eliminates the wear marks on their
fuser. This extends the life of the fuser (or multiple fusers).
A rotary switch with a protruding knurled knob is on every new fuser assembly. This is
the width switch.
The width switch on the new fuser assembly has eight different positions: 0-7. Zero (0)
is the default width setting.
This eight-position switch tells the print engine the specific width range of media that
can be run through the fuser. This switch must be set by the customer before the fuser's
first use. It is expected to stay in that position for the life of the fuser.
A label sheet is included in every fuser box.
Xerox Color J75 Press 10-39
®
User Guide