Xerox Color J75 Press User Manual page 306

SquareFold Trimmer Module
013-240
Cause: Jam or communication error with the SquareFold Trimmer Module
Remedy: Perform the following:
1. Power off/on the machine.
2. If fault persists, call for service.
013-241
Cause: Jam or communication error with the SquareFold Trimmer Module
Remedy: Perform the following:
1. Power off/on the machine.
2. If fault persists, call for service.
013-242
Cause: Jam or communication error with the SquareFold Trimmer Module
Remedy: Perform the following:
1. Power off/on the machine.
2. If fault persists, call for service.
013-243
Cause: Jam or communication error with the SquareFold Trimmer Module
Remedy: Perform the following:
1. Power off/on the machine.
2. If fault persists, call for service.
013-246
Cause: Jam or communication error with the SquareFold Trimmer Module
Remedy: Perform the following:
1. Power off/on the machine.
2. If fault persists, call for service.
013-303
Cause: A top cover is open or a jam/fault occurred with the SquareFold Trimmer Module
Remedy: Perform the following:
1. Open the Top Left and Right Covers of the SquareFold Trimmer Module.
2. Carefully remove all sheets and paper scraps from jam clearance areas.
3. Close the SquareFold Trimmer Module Top Left and Right Covers.
4. Check the Trimmer Waste Container:
If full, empty the container and reinsert it into the SquareFold Trimmer Module.
If the container is partially pulled out, push it completely in.
16-24 Xerox Color J75 Press
®
User Guide