Building over a cupboard or drawer
If the hob is to be installed above a cup-
board or drawer it will be necessary to fit a
heat resistant board below the base of the
hob on the underside of the work surface.
It is also recommended to carry out the
electrical connection to the hob as shown in
diagrams 1 and 2.
Building over a kitchen unit with door
Proper arrangements must be taken in
designing the furniture unit, in order to
avoid any contact with the bottom of the
hob which can be heated when it is oper-
ated. The recommended solution is shown in
The panel fitted under the hob ("a") should
be easily removable to allow easy access if
technical assistance is needed. The space
behind the kitchen unit ("b") can be used for
Cut Out Size
The dimensions of the cut-out are given in the
Dimensions are given in mm.