Table of Contents
Advertisement
7. Building In
A = Auxiliary burner
R = Rapid Burner
These hobs can be inserted in a built-in kitchen unit
whose depth is between 550 and 600 mm. The hobs
dimensions are shown in Fig. 9.
INSTALLATION AND ASSEMBLY
These hobs can be installed in a kitchen unit with an
opening for insertion whose dimensions are shown in
Fig. 10.
Carry out the building in of the hob as follows:
•
put the relevant sealings, supplied with the hob, on
the edges of the cut out, taking care that the sealings
meet without overlapping;
•
place the hob in the cut out, taking care of its centring;
•
fix the hob with the relevant screws (Fig. 11).
The edge of the hob forms a double labyrinth seal
which provides a total guarantee against infiltration of
liquids.
If several function are to be combined (2 burners hob
+ fish kettle burner + 2 plates hob) follow the
recommendations given in Fig. 10, which indicates the
minimum distance to be observed between the various
openings to be cut on the surface of the unit.
FO 0952
FO 0954
FO 0402
a) sealing
R
A
290
Fig. 9
Fig. 10
a
Fig. 11
37
Advertisement
Table of Contents
