Installation; Building In - Electrolux EHE 682 Instruction Booklet

Installation

The hob must be installed according to the
instructions supplied.
The hob must be installed by qualified personnel
to the relevant British Standards.
Please, ensure that, once the hob is installed, it
is easily accessible for the engineer in the event
of a breakdown.
Once the hob has been installed, it is important
to remove any protective materials, which were
put on in the factory.
The manufacturer will not accept liability, should
the above instructions or any of the other safety
instructions incorporated in this book be ignored.
Cut Out Size
Supply connections

Building In

Building over a cupboard or
drawer
FO 2225
1
FLEX
OUTLET
FO 0763
2
FO 0764
ON/OFF SWITCH
ON/OFF SWITCH
FLEX
OUTLET
11