Configuring The Server - Cisco UCS C260 M2 User Manual

CONFIGURING the SERVER

CONFIGURING the SERVER
Follow these steps to configure the Cisco UCS C260 M2 General-Purpose Rack Server:
STEP 1 VERIFY BASE SKU, page 9
■
STEP 2 CHOOSE CPU(S), page 10
■
STEP 3 CHOOSE MEMORY, page 11
■
STEP 4 CHOOSE HARD DISK DRIVES or SOLID STATE DRIVES, page 14
■
STEP 5 CHOOSE MODULAR DRIVE BAYS, page
■
STEP 6 CHOOSE RAID CONFIGURATION, page 18
■
STEP 7 CHOOSE PCIe OPTION CARD(S), page 20
■
STEP 8 CHOOSE SECURE DIGITAL (SD) CARD, page 24
■
STEP 9 CHOOSE POWER SUPPLIES, page 25
■
STEP 10 SELECT AC POWER CORD(s), page 26
■
STEP 11 ORDER TOOL-LESS SLIDE RAIL KIT, page 29
■
STEP 12 ORDER OPTIONAL CABLE MANAGEMENT ARM, page 29
■
STEP 13 ORDER OPTIONAL USB BOOT DRIVE, page 30
■
STEP 14 ORDER OPTIONAL NETWORK CARD ACCESSORIES, page 31
■
STEP 15 ORDER A TRUSTED PLATFORM MODULE, page 34
■
STEP 16 CHOOSE OPERATING SYSTEM AND VALUE-ADDED SOFTWARE, page 35
■
STEP 17 CHOOSE OPERATING SYSTEM MEDIA KIT, page 38
■
STEP 18 CHOOSE SERVICE and SUPPORT LEVEL, page 39
■
OPTIONAL STEP - ORDER RACK(s) on page 43
■
OPTIONAL STEP - ORDER PDU on page 44
■
8
16s
Cisco UCS C260 M2 High-Performance Rack-Mount Server