Cisco UCS C260 M2 User Manual page 22

CONFIGURING the SERVER
Figure 4 PCIe Slot Locations
Table 11 PCIe Expansion Slot Numbering
Slot Number
7 (on riser card)
6
5
4
3
2
1 (on riser card)
Caveats
Slots 1 and 7 accommodate standard profile cards. To use a low-profile card in one of these
■
slots, you must have a standard-profile rear panel attached to the card.
The Cisco UCS 1225 Virtual Interface Card (VIC)/2-port 10Gbps card may be installed in
■
either slot 1 or 7. Two cards may be installed. Note, however, that if the server is running
UCSM, only slot 7 is supported for the VIC card.
Additional considerations for the Cisco 1225 VIC card:
■
22
Slot Characteristics
PCI-Express Gen-2x16, x16 connector, half-length, standard profile
PCI-Express Gen-2x8, x8connector, half-length, low-profile
PCI-Express Gen-2x8, x8connector, half-length, low-profile
PCI-Express Gen-2x8, x8connector, half-length, low-profile
PCI-Express Gen-2x8, x8connector, half-length, low-profile
PCI-Express Gen-2x4, x8connector, half-length, low-profile
PCI-Express Gen-2x16, x16 connector, half-length, standard profile
Cisco UCS C260 M2 High-Performance Rack-Mount Server
1 7
1 6
1 5
1 4
1 3
1 2
1 1