Cisco UCS C260 M2 User Manual page 32

CONFIGURING the SERVER
Choose Optional SFP Modules
Optical Cisco SFP+ modules are listed in
Table 19 Available SFP Modules
Product ID (PID) PID Description
SFP-10G-SR 10GBASE-SR SFP+ Module
850 nm, multimode, SR, 3.3V, LC connector, with Digital Optical Monitoring
DS-SFP-FC8G-SW 8 Gbit SFP+ Module
850 nm, multimode, SR, 3.3V, LC connector, with Digital Optical Monitoring
Approved Configurations
(1) Choose Up to Two SFP+ Modules for Each Network Card Ordered
You may choose one or two SFP+ optical modules cables for each network card ordered. You
■
would normally order two modules for connecting to the primary and redundant network
switching equipment. With the SFP+ optical modules, you can use common fiber optic
cables, widely available.
See Figure 5 on page 33
Caveats
The SFP-10G-SR optical module listed in
cards, as they do not come by default with any optical modules:
—
—
—
—
The DS-SFP-FC8G-SW optical module listed in
PCIe cards, as they do not come by default with any optical modules:
—
32
for typical SFP+ and twinax connections to the network cards.
UCSC-PCIE-BSFP (Broadcom 57712)
N2XX-ABPCI02 (Broadcom 57711)
UCSC-PCIE-CSC-02 (Cisco VIC 1225 Dual Port 10Gb SFP+ CNA)
UCSC-PCIE-ESFP (Emulex OCe11102-FX Dual Port 10Gb SFP+ CNA)
N2XX-AEPCI05 (Emulex LPe 12002 Dual Port 8Gb Fibre Channel HBA)
Table 19.
Table 19 should be ordered only for the following PCIe
Table 19 should be ordered only for the following
Cisco UCS C260 M2 High-Performance Rack-Mount Server