Cisco UCS C260 M2 User Manual page 21

Table 9 Available PCIe Option Cards (continued)
Product ID (PID)
UCS Storage Accelerators
UCSC-F-FIO-3000M
UCSC-F-FIO-1205M
UCSC-F-FIO-785M
UCSC-F-FIO-365M
Approved Configurations
(1) Slot Usage Guidelines
For the best performance, populate the PCIe slots in the order shown in
■
type of add-on card. For each card type, populate the primary slot first, followed by the
secondary slot, then any alternate slots. See
Table 10 Recommended PCIe Slot Population
PCIe Card Type
RAID Controller
Low-profile NIC
Cisco UCS 1225
Virtual Interface Card
10GbE PCIe LOM (dual port SFP+)
UCS Storage Accelerators
UCSC-F-FIO-3000M 2
UCSC-F-FIO-1205M 3
3
UCSC-F-FIO-785M
UCSC-F-FIO-365M 3
Notes . . .
1. Slot 4 is reserved for the 10 GbE PCIe LOM card. No other PCIe card may be installed there.
2. The UCSC-F-FIO-3000M is a full-height card and must be installed only in slots 1 or 7
3. Not supported in slot 4
Cisco UCS C260 M2 High-Performance Rack-Mount Server
PID Description
Cisco UCS 3.0 TB MLC Fusion ioDrive2 for C-Series Servers
Cisco UCS 1205 GB MLC Fusion ioDrive2 for C-Series Servers
Cisco UCS 785 GB MLC Fusion ioDrive2 for C-Series Servers
Cisco UCS 365GB MLC Fusion ioDrive2 for C-Series Servers
Primary Slot
Figure 4 for the slot locations.
Secondary Slot
3 5
6 3
7 1
—
1
4
— —
— —
— —
— —
CONFIGURING the SERVER
Card
Height
Full
Half
Half
Half
Table 10 for each
Alternate Slots
—
1, 2, 5, or 7
—
1, 7
1, 2, 3, 5, 6, 7
1, 2, 3, 5, 6, 7
1, 2, 3, 5, 6, 7
21