Table of Contents
Advertisement
58
Text messaging
See page 15 for the complete
character map.
Press
to switch between
the different text entry modes,
the mode is shown in the top
corner of the display.
If you experience any problems, please call the Helpline on 0870 605 8047
Standard text entry
With standard text entry you can enter a word by
pressing each letter button a number of times to
display the character you want on the screen. For
example, to write the word "Hello", press
twice,
5
three times,
Writing tips for standard text entry
1. If you make a mistake, press
last character/digit to the left of the cursor.
2. Press
LEFT
the cursor through the characters/digits.
Characters/digits are entered to the left of the
cursor.
3. Press and release
0
hold
to insert a 0.
4. Press
1
to enter any of the following: . ,
5. Press and release
'insert symbol' table, then use
highlight the symbol you want and select
insert it into your message.
6. To enter a number, press and hold the required
number button until the number is displayed.
7. Press
Back
8. The cursor automatically moves to the right after a
couple of seconds. So when the next letter is on
the same button as the one you have just entered,
wait for the cursor to move to the right before
trying to enter it.
or email bt.helpdesk@suncorptech.com
5
three times and
Clear
or
RIGHT
navigation button to move
0
to insert a space. Press and
as a shortcut to the
to go back to the previous screen.
4
3
twice,
6
three times.
to delete the
–
? ! etc.
UP
or
DOWN
to
OK
to
Advertisement
Table of Contents
