Call Screening - BT REVEAL User Manual

44 Answering machine
You can adjust the call
screening volume using the
or DOWN buttons.
When auto talk is set to off you
can also lift the handset off the
base (without automatically
answering the call) and still use
the screening option.
If you experience any problems, please call the Helpline on 0870 605 8047
3. Press UP
displayed, select OK.
4. You will hear, "Please speak after the tone". After
the beep, speak your memo clearly into the
handset. While recording, the display will
show Recording
Save
5. Press
played back to you for checking.
OK
6. Press
the memo.
7. Press

Call screening

When the answering machine is on and takes a
UP
call, you can use the loudspeaker to listen to the
caller leaving a message. You can then identify
the caller and decide whether to take the call
in person.
To screen a call (when the handset is off the
base)
1. When your BT Reveal rings, select the
option. You can hear your caller begin to leave a
message. The display shows
above the right hand option button.
2. If you want to interrupt and speak to the caller
press
Or
If you want to end call screening and let the
answering machine take the call and finish
recording the message, select
or email bt.helpdesk@suncorptech.com
or DOWN until Record Memo
.
to end recording. Your memo will be
to save the memo or
to exit and return to standby.
. Recording will stop automatically.
is
Delete
to delete
Screen
Screening , with End
.