BT DIVERSE 3016 CLASSIC User Manual page 43

To adjust the ringer volume in the
base station
You can choose the 'crescendo' ring that
gradually increases in volume, plus 5
additional levels:
and is off.
0
0
• Press the
SET
• Press the button.
0
• Press the button.
5
• Press the
OK (
sounds and the current setting is
displayed.
• Use the keypad to enter the setting
you want:
Volume =
1-5
Crescendo =
Off = .
0
• Press the
OK (
• Press the
RED PHONE
return to standby.
To adjust the melody of the base
ringer
There are 10 levels.
MNO
0
• Press the
SET
• Press the button.
0
• Press the button.
6
• Press the
OK (
You hear the current melody and the
display shows the current setting.
• Press a button
melody you want.
• Press the
OK (
• Press the
RED PHONE
return to standby.
40
= lowest; = loudest;
1 5
JKL
0-6
5
button.
button. The ringer
)
(1 is the lowest).
.
6
button to confirm.
)
button to
0-9
6
button.
button.
)
until you hear the
0-9
button to confirm.
)
button to
To switch the confirmation tones on
and off
Whenever you confirm a new setting,
your handset gives a long confirmation
beep. You can switch these beeps on
and off.
DEF
1
3
• Press the button.
SET
• Press the , then the
1
• Press the
OK (
• Press to switch the tones off.
0
Or
• Press to switch the tones on.
1
• Press the
OK (
• Press the
RED PHONE
return to standby.
To switch the handset button beeps
on and off
Whenever you press a button on the
phone you hear a beep. You can switch
these beeps on and off.
GHI
1
4
• Press the button.
SET
• Press the , then the
1
• Press the
OK (
• Press to switch the beeps off.
0
Or
• Press to switch the beeps on.
1
• Press the
OK (
• Press the
RED PHONE
return to standby.
0
1
buttons.
3
button.
)
button to confirm.
)
button to
0
1
buttons.
4
button.
)
button to confirm.
)
button to