BT DIVERSE 3016 CLASSIC User Manual page 27

Either:
• Press the
RED PHONE
recording. Your recording is played
back.
Or if you want to add a concluding
statement
Stop
• Press the
STOP
station. The voice says "Recording
concluding announcement".
• Speak your concluding announcement
through the handset.
• Press the
STOP
station to stop recording. Your
outgoing messages are played back.
Recording times
The total recording time available on your
Diverse 3016 answering machine is 15
minutes.
Maximum message length for incoming
and outgoing messages is 2 minutes 50
seconds.
Recording stops automatically if a pause of
longer than 2 seconds is detected.
To hear your outgoing messages
You can play back your outgoing
announcements at any time.
At the base station:
Play
• Press the
GREETING
The current setting is announced.
• Press the
PLAY
message is played back.
24
button to stop
button on the base
button on the base
button.
button. Your outgoing
To delete an outgoing message
Skip
Skip
At the base station:
• Press the
GREETING
The voice tells you the current setting.
• Press the or
Skip
the announcement you wish to delete.
• Press the
DELETE
announcement.
Please note
If you delete your Announcement Only
message, your answering machine cannot
be switched on until you either record a new
one or set one of the other outgoing
messages.
If you delete your own recorded
Announcement 1 or 2, the pre-recorded
message is automatically reinstated.
Mains power failure
If the mains power fails, your outgoing
messages, recorded messages and memos
will be saved. However, you will need to
reset the time and date.
In the event of any mains power
interruption, you must unplug your
Diverse 3016 telephone line cord from the
wall socket, otherwise your other telephones
will not ring. Once power has been
restored, plug your Diverse 3016 cord back
into the telephone wall socket.
Delete
button.
buttons to select
Skip
button to delete the