Table of Contents
Advertisement
Follow these steps to get your Diverse 3016 Classic
ready for use.
Plan where you will put your Diverse 3016
Classic. It should be within two metres of
a power socket and the phone socket.
1. Connect the power cable.
Plug the power cable into the power
socket on the underside of your Diverse
3016 Classic. Take care that the
telephone line cord and power cable plugs
are connected to the correct sockets.
Incorrect placement could damage the
station.
2. Plug the 3 pin adaptor
into a mains power socket
and switch on.
Use only the power adaptor
C39 280 - Z4 - C174 / . . – C67 with your
Diverse 3016 Classic.
3. Install the rechargeable
batteries in the handset
The handset uses the two AA size nickel
cadmium (NiCad) batteries, which are
supplied. To install them, insert the
batteries as indicated on the label inside
the battery compartment and slide the
battery compartment cover shut.
The battery compartment cover may be
found in the packaging with the
batteries.
Red socket
Important
When replacing batteries always use good
quality nickel cadmium (NiCad)
rechargeable AA types with at least
600mAh capacity in order to achieve the
specified operating time. Never use other
batteries or conventional alkaline
batteries. They could result in a short
circuit or destroy the battery casing.
Recommended rechargeable batteries are
available from the
08457 908070
Slide battery cover down and lift off.
Diverse Helpline
and the BT Shop.
9
Hide quick links:
Advertisement
Table of Contents
