Table of Contents
Advertisement
5. Connect the telephone
line cord to the Diverse 3016
Classic base station.
Ensure that this is fitted correctly into
the right socket.
6. Plug your Diverse 3016
Classic into the phone
socket
If you do not have a modern phone
socket, call Freefone 0800 800 150
and ask for a BT engineer to come and
fit the correct socket. This is a
chargeable service.
WARNING
It is recommended that the line cord is
not connected until the handset is fully
charged. This will prevent the risk of the
phone being answered prior to the
batteries being fully charged and
therefore not achieving their optimum
capacity.
If the
symbol flashes
continuously, it means the handset is either
out of range or is not registered with the
base station. To register, follow the steps on
page 46. All additional handsets you
purchase will need to be individually
registered with the base station before they
will work with the Diverse 3016 Classic.
The
symbol may also f lash after a power
failure. Provided the handset has been
registered with the base, the
stop f lashing after a while indicating the
handset has automatically re-registered to
the base station. If it continues to f lash, re-
register the handset to the base station.
Please note: If you go out of range of a
base station for a long time while your
handset is switched ON, it may take more
than 20 minutes to 'find' the base station
again when you come back within range.
However, by simply switching the handset
OFF for a moment, then ON again, it will
find the base station within a few seconds.
symbol will
11
Hide quick links:
Advertisement
Table of Contents
