Specifications - Mirage DSK-1 Manual

SPECIFICATIONS

Keyboard
61- note (C-C) polyphonic keyboard with velocity sensitivity
Voices
Eight-voice polyphonic and polytimbral
Panoramic stereo outputs
Sounds
Waveforms derived from digitally sampled (recorded) acoustic or electronic sound
sources.
Up to 16 different sampled sounds available at one time.
Four instantly-accessible programs per sound bank.
Sounds stored on 3-1/2" diskette (3 upper and 3 lower sound banks per diskette).
Program Parameters
Low pass filter control: cutoff frequency, resonance (Q), keyboard tracking.
Low frequency oscillator: speed (frequency) and depth (amplitude) with depth assignable
to modulation wheel.
Keyboard control: master turning, pitch bend range, velocity sensitivity adjustment,
upper/lower keyboard balance.
Separate amplitude (loudness) and filter (brightness) envelopes
Five independently controllable envelope parameters: Attack Rate, Peak Level, Decay
Rate, Sustain Level, Release Rate.
Dynamic envelope parameters controlled by key velocity or keyboard scaling, for both
amplitude and filter: Velocity Sensitive Attack Rate, Peak Level, Sustain Level and
Release Rate (key-up sensitive) as well as Keyboard Scaled Decay Rate.
Sampling
Multi-sampling ability: up to 16 different wavesamples available at any one time.
Sampling parameters: 20 individually adjustable parameters controlling sample time,
memory assignment, looping, tuning and filtering.
Sampling rate: variable from 10KHz to 33KHz
Sampling time: variable from 2 to 6.5 seconds (per keyboard half).