The Sequencer - Mirage DSK-1 Manual

Press 1, 2, 3 You are now telling the Mirage to You are now telling the Mirage to
or4on SELECT change to the desired program for that change to the desired program for that
keypad keyboard half. keyboard half.
Selecting parameter 25 (UPPER/LOWER PROGRAM LINK) and switching it ON will Selecting parameter 25 (UPPER/LOWER PROGRAM LINK) and switching it ON will Selecting parameter 25 (UPPER/LOWER PROGRAM LINK) and switching it ON will
connect the program select switch to connect the program select switch to both keyboard halves, so as you change the program for
one keyboard half the other will change automatically. one keyboard half the other will change automatically.

THE SEQUENCER

THE SEQUENCER
The Mirage features a 333-note sequencer that will allow you to record and save a performance.
Operating very much like a sound Operating very much like a sound-on-sound tape recorder, the sequencer enables you to buil
patterns by overdubbing previous sequences. Sequences can be stored on Formatted Diskettes. patterns by overdubbing previous sequences. Sequences can be stored on Formatted Diskettes. patterns by overdubbing previous sequences. Sequences can be stored on Formatted Diskettes.
Before using the sequencer, we suggest that you review the sequencer parameters in the Before using the sequencer, we suggest that you review the sequencer parameters in the Before using the sequencer, we suggest that you review the sequencer parameters in the
PARAMETER APPENDIX, paying particular attention to the following:
both keyboard halves, so as you change the program for
note sequencer that will allow you to record and save a performance. note sequencer that will allow you to record and save a performance.
sound tape recorder, the sequencer enables you to build up
, paying particular attention to the following:
U(1,2,3 or 4)