Mirage DSK-1 Manual page 35

Table of Contents

You're now ready to begin to sample wavesample #l. If you've selected the lower keyboard half

You're now ready to begin to sample wavesample #l. If you've selected the

and checked the input level, all you'll have to do is play the sound to be sampled.

Wavesample #2 will be entered in the memory in exactly the same way wavesample #1 was with

the following changes in parameter values:

Now you can simply press SAMPLE LOWER again and repeat the sampling procedure to record

wavesample #2.

SAMPLING PARAMETERS

G PARAMETERS

In order to better understand the sampling process, we recommend that you familiarize yourself

with the Sampling Parameters listed in the PARAMETER APPENDIX. Understanding these

with the Sampling Parameters listed in the

parameters is your best help in obtaining good samples.

The chart below provides some guidelines for allocating Mirage memory when using multiple

wavesamples. Use parameter 26 to select the upper or lower wavesample you want, then adjust

26 to select the upper or lower wavesample you want, then adjust

lower keyboard half

. Understanding these

Table of Contents

Show Quick Links

Table of Contents