Mirage DSK-1 Manual page 59

Note: Changing Programs remotely from a MIDI controller will cause the Mirage to display only
the value of the program (1, 2, 3, or 4). The first digit of the display will be blank.
Example:
You can load a sound from the front panel of the Mirage and select a program number at the
same time. When you do so the Mirage will send a program change over MIDI.
When loading a Lower, Upper, or Both sounds from disk, you can select program 1, 2, 3 or 4
before hitting the ENTER button. When the sound finishes loading, the program you specified
will be selected.
If parameter 84 is set to a value of 2 or 3, then loading a sound from the Mirage front pane1 will
transmit MIDI program change information as outlined in the tables on the previous page. If you
change programs with the upper/lower program link switch (parameter 25) set ON, then program
changes 13 through 16 will be transmitted. If you change a lower program with the link switch
set OFF, then program changes 29-32 will be transmitted. If you change an upper program with
the link switch set OFF, then program changes 45-48 will be transmitted.