Mirage DSK-1 Manual page 53

This parameter will allow you to adjust the LOOP END in individual samples within the chosen
loop end page. This fine adjustment will help you match the loop end to the loop start as
smoothly as possible. (See MEMORY in GLOSSARY).
65/Loop Switch (On-Off)
Turns the looping function on and off. When OFF, the wavesample will play back from
beginning to end and then stop. When ON, the wavesample will play from beginning to LOOP
END and then continue playing immediately from LOOP START, playing the loop segment over
and over as long as the key is depressed. Note that amplitude envelope parameters will control
the decay, sustain and release functions of the note.
66/Wavesample Rotate
This parameter will "move" or "rotate" the current wavesample within the Mirage memory one
sample at a time. It is used to eliminate "dead space" at the beginning of a wavesample or to
align an appropriate LOOP START point with a segment boundary. Pressing the On/Up button
will move the entire wavesample one sample to the right in memory, Pressing the Off/Down
button will move the wavesample one sample to the left. This parameter is called ROTATE
because rather than becoming "lost", values at the wavesample boundary will shift to the
opposite end of the wavesample as they are moved. (MASOS, the Mirage Advanced Sampling
Operating System, which is available with the Advanced Sampler's guide from your Ensoniq
dealer, implements a much more elaborate set of parameters for manipulating wavesamples than
the standard O.S. described here.)
67/Relative Tuning - Coarse (00-07)
Alters the pitch of the current wavesample in octave increments.
68/Relative Tuning - Fine (00-FF)
Alters the pitch of the current wavesample in 1/20 semitone increments. There are 256
increments expressed in hexadecimal.
69/Relative Amplitude (00-63)
Adjusts the amplitude of the current wavesample only. This allows you to match the volume
levels of different wavesamples.
70/Relative Filter Frequency (00-99)
Adjusts the cutoff frequency of the filter for the current wavesample, relative to the other
wavesamples in the wavetable.
71/Maximum Filter Frequency (00-99)