Saving Sounds - Mirage DSK-1 Manual

There are four general playback parameters - MASTER TUNE, PITCH BEND RANGE,
KEYBOARD VELOCITY SENSITIVITY and KEYBOARD BALANCE. These parameters will
always apply to the entire keyboard. You needn't adjust them every time you turn the Mirage on
- they will automatically come up as default values. If you want, you can change these settings
and save the new values to diskette (Param. 14). Then you can later use that diskette to "boot"
the Mirage, and your new values for these parameters will be loaded in automatically, as part of
the operating system.
SAVING SOUNDS AND PROGRAMS
As with a synthesizer, any sound you load into the Mirage can be modified extensively using the
playback parameters. Before too long (probably later this evening), you'll want to save the
programs you've personally created, or samples you've made. To do that, you'll need a blank
Formatted Diskette.
Formatted diskettes (which you can create yourself using the Formatting Program that came with
the Mirage) have the same set-up as Ensoniq Sound Diskettes. Each one can store three sounds,